Water Removal Near Me

Whether you have suffered a leaky pipe, a broken water line, a ton of rain, or even a full on flash flood, whenever your home or business is standing underwater, you need to find a water removal surface near me, and you need to find it fast. Water damage, even if it is just a foot or so of water, can lead to mold and mildew growth, structural damage, loss of property, and other problems.

In order to get a handle on the water problems, you need to understand what they can do to your home, how water damage can happen, and what processes water removal companies can use to get the water out. It only takes a few inches of water for damage to occur, so removing the water is often the highest priority.

Should You Clean Up Water On Your Own?

If you find that water has caused damage due to a storm or an accident with piping, it can be tempting to clean the water yourself. After all, all you need is a mop, some towels, maybe a couple of buckets, and the excess water can be taken out of the building and into a place where it can do no harm right?

Well, even though you removed the water on the surface, the water still likely sunk into the floor, the walls, and the rest of the structures it touched. Additionally, if the water damage happened anywhere but ground level, then it could have sunk into the floor as well, and that floor is someone else’s ceiling!

However, even removing the water isn’t the end of your problems, because drying the affected structures requires professional knowledge and equipment that you probably won’t have. In order to get everything back to normal, you should focus on finding a water removal near me company, preferably one that is a 24/7 water removal company, as they can help whenever the water leak doesn’t happen on a schedule.

What is the cost of water extraction?

In most cases, the water extraction cost will be calculated on the square footage of the affected area, which makes it hard to give a direct estimate of what the process of extraction will look like. However, the bigger the affected area as well as the larger amount of water that needs to be extracted, the more everything will cost.

Additionally the type of material that needs to be dried and replaced is also something that is taken into consideration when it comes to the cost. Replacing and installing sheetrock and drywall after an extraction is less expensive than replacing and installing new ceiling tiles and carpet for instance.

Finally, the type of water also affects the cost. Clean water from leaking pipes and rainwater is easier to clean up due to the low bacteria content. Gray water from toilets and dishwashers is a bit more expensive to clean up, and black water from backed up sewage lines and flooding is very expensive due to the safety precautions involved.

Additional damage can be caused by mold growth as well in the affected areas, but many companies offer mold removal as well in their restoration process.

Regardless of the cost, you don’t want to let that stop you from working with a water removal near me service, as the damage will only get worse if you just clean up all the water you can see.

How do you clean up spilled water with the water removal process?

While it might seem like you can remove spilled water with a mop, bucket, and some elbow grease to push the water outside, whenever floods or massive leaks occur, working with a water removal company you found with a simple water removal near me search can be just what you need.

They have proceeds and equipment to ensure that the water removal is done properly, but the first step comes with stopping the problem entirely. Finding out what is causing the water leak (if a leak is the problem) and preventing it from causing more water damage is going to be the first and most important thing. Moisture extractor crews will also look around with moisture sensors and meters to see exactly how wet the area is and if it requires immediate action to handle the water damage.

Then they will use a series of pumps and vacuums to get the water out of your house and into an area where it will do no harm to your home. Once the surface water is out, then they will use professional drying systems to dry the ceilings and the walls through evaporation. Once that is done, the team will disinfect your walls and use a dehumidification process to remove any last moisture from the building.

As you can see, cleaning up the spilled water can be a lengthy but also thorough process, and once the entire water removal near me process is done, then you can get back into a clean and entirely dry home free from water damage.

How do you dry out water damage with the drying process?

Now, something interesting to discuss here for a bit is the dehumidification process. Dehumidifiers are often associated with allergies and health, but they are used to remove moisture from the air during the extraction process. The process of dehumidification removes the water from the air, and while you can try to use standard purchasable dehumidifiers for this purpose, having a professional team with professional dehumidifiers is the best way to ensure that everything is dry.

Water that sinks into your floors or behind your walls can cause far more damage than the initial flooding would. The wet environments would be perfect for mold and mildew growth and that could mean that areas of your home would not only be less structurally sound, but that they would also need to be replaced if the mold damage and mildew damage is too severe for them to be professionally cleaned. Thankfully, most companies offer water damage restoration services and mold removal in their restoration process.

If you want to dry out water damage yourself, then remove furniture and other wet items from the room, and then place a high powered commercial dehumidifier into the center of the room. Turn it on, and let the machine do what it does best. Just make sure that you empty out the collected water every few hours to prevent the machine from shutting itself off.

Household dehumidifiers can work, after all they operate the same as a commercial dehumidifier, but they don’t have the capacity to hold all the water that will be stuck in your home after a flood.

They tend to hold around ten gallons of water, while most commercial dehumidifiers tend to hold 50 gallons or more at the start, and you will be spending most of your time emptying the standard dehumidifier.

Plus, household dehumidifiers are designed to regulate the humidity in your home, not remove it entirely, so they will shut off much more than a commercial dehumidifier will. You can rent a commercial dehumidifier for around $50 dollars a day, and you will likely only need it for one to two days.

High pressure fans are also great tools for getting rid of excess moisture and you can use them to dry objects out. You can buy specialty industrial fans that are designed to remove the excess water and leave anything placed underneath them bone dry, and again, while household fans will work as they operate on the same principle, they often won’t be as good as the industrial fans you can find and rent for a few days.

What is water removal called?

Before you look for water clean up near me, you might want to consider understanding what water removal is actually called. The plumbing and water clean up companies are often called water extraction companies, as water extraction focuses on taking water away from somewhere and using it for another purpose. So if you want to look for water removal near me, then just look for either water extraction or water mitigation. [1]

What Is Water Mitigation?

While water extraction is the process of removing water from your home, water mitigation focuses on reducing the property loss caused by a flood or incident with water. Sometimes water extraction companies also focus on water mitigation as well, where your property is properly dried, cleaned, and sanitized to prevent water damage from happening after the fact.

The real reason that so much emphasis is placed on getting the water out and getting all your items and the entire building dry is because, if the building needs repairs, those repairs can’t happen while everything is soaking wet. If repairs from the flood or water leak are done before everything is properly dried, then the whole structure could be compromised and any repairs that are made would not be as effective.

No matter how water has seeped into your home or business, if you are the victim of water damage the first priority is to get the water out! Reach out to your nearest water clean up company and start the process of getting the water out of your home or business and back where it belongs. All without having to worry about any problems showing up after the water is gone, and then you can get back to your normal water free routine!

WHY WAIT?

Let us fix your plumbing issue quickly & easily today!

Touch to Call!